An Introduction To Roofing: Terms Often Used By Hamilton Roofing Company Technicians
Are you totally clueless about roofing? Most Home owners are. It is sometimes frustrating to hear your contractor mentioning certain words whose meanings you are unaware of, and you have to keep asking for clarification. While a Hamilton roofing contractor representative will strive to express things in a simplified way, it would still do well for you to be conversant with the mostly used terms in roofing so as to make communication even easier. Here is a compilation of the most important terms in roofing and what they actually mean:
A shingles is a small piece of roofing material. Shingles are arranged in such a way that they either fit into or overlap one another to provide the entire covering of the house.
They can be made from stones, clay, metal, wood or any other tough, non absorbent materials. Unlike large, flat roofing panels, the small pieces are easy to transport and fix. The most commonly used shingles are made from asphalt.
Eave and Drip edge
An eave is the part of the roof that extends past the walls of the house. Eaves should be long enough to prevent the roof from pouring rain water onto the walls and foundation of the house.
For taller buildings, the developer may avoid very long eaves and instead install drip edges along them to redirect water and dispose it of safely.
Flashing is a technique that is used around protruding structures on the roof to prevent water from dripping inside the house through the gaps in between their borders. Specially made shingles are usually placed around these areas. They are special because their shapes and tracks defer from the rest to make them direct water side ways.
Crickets are part of the specially molded shingles that divert water away from protruding structures on the roof. they are more like ridges with sideways flow, but their edges fit or overlap perfectly with other shingles.
In roofing, a deck is the base on which shingles are arranged on the roof. Depending on your budget and preference, you may make your deck out of wood, plastic or metal boards. Bases made from thin metal sheets tend to last longer than the rest.
Also known as beams, these are the wood or metal structures that criss-cross at the upper part of a building to provide a support roofs from below and ceilings from above. A materials used to construct rafters should be light but strong.
Blistering is the slight upward or sideways displacement of shingles that happens when they absorb water or if bubbles get under them. Blistering due to absorption mainly happens with wood shingles.
If metal or asphalt shingles are inserted well by a professional roofer, it is very difficult for such problems to arise. If your roof tends to get blister often, you might need an overhaul repair or replacement to prevent damage of your ceiling.